Type-LWS10

CHARACTERISTICS:

• Unbalanced.

• System attached to the shaft by allen screws.

• Not dependent on the rotation direction.

OPERATING LIMITS:

d1= 14 ÷ 150 mm p= 10 kg/cm²

v= 20 m/s t= -15÷ +200oC (*)

(*) The temperature resistance depends on the material of the

secondary seals used.

The operating limits are defined by the PV factor which is

determined for the sealing system characteristics and those of

the application.

DESCRIPTION:

Recommended for working with sticky fluids and

fluids laden with particles and fibres. Unlike the

multispring models, the wave spring model cannot

be blocked or obstructed and its open leaf design

produces a self-cleaning effect.

Standard L9 type stationary part.

Seal compliant with standard EN 12756 (KU).

Available with a pumping ring on the casing to reduce

the temperature between the contact surfaces

and facilitate the barrier fluid movement in the case

of double mounting (reference LWS10-F).

Contact surface kits supplied available.